 |
|
|
|
|
|
|
 |
|
ABOUT
PORCERAX II
|
Porcerax II Stock List
Porcerax
II Rounds (7 micron and 20 micron)
International Mold Steel offers the following sizes
of Porcerax II in round bar:
| ¼” OD x 4” |
$160.00 |
| 3/8” OD x 7” |
$295.00 |
| ½” OD x 8”
|
$390.00 |
| 5/8” OD x 8” |
$470.00 |
| ¾” OD x 8” |
$575.00 |
| 1” OD x 8” |
$795.00 |
All
rounds are +.010 / .020 and will only be sold in full
length pieces.
7
Micron and 20 Micron
Rectangles are cut from a master block approximately
8" x 12" x 27"
IMPORTANT
WARNING:
It is imperative that anyone coming into contact with
Porcerax II during the mold building or molding operations understand the
characteristics and sensitivity of this material. Any questions should be directed to
International Mold Steel at 1-800-625-6653.
|
|
< PREVIOUS
| HOME
| NOTE:
All technical and engineering data and suggested procedures,
specifications and applications contained in this publication
are for general information only. Sintokogio, Ltd.
International Mold Steel and/or their distributors disclaim
any and all express or implied warranties of merchantability,
suitability for any particular purpose or use, or freedom from
infringement of any patent, trademark or copyright. Porcerax
II® is a registered trademark of International Mold Steel,
Inc. and Sintokogio, Ltd. |
 |
| |
|
|
1-800-625-6653 |
 |
| International
Mold Steel, Inc. is a licensed distributor of Porcerax II, a
SINTOKOGIO,LTD. product. |
 |
International
Mold Steel, Inc.
6796 Powerline Drive
Florence, KY 41042 USA
Tel: (859) 342-6000 or 1-800-625-6653
Fax: (859) 342-6006
Literature: info@imsteel.com
Sales
Desk: salesdesk@imsteel.com |
 |
 |
|
 |
|
|
|
