Porcerax II is a sintered, porous metal with porosity in the range of 20 to 30% by volume. A system of interconnected pores with an average diameter of 7 or 20 micron is dispersed throughout the Porcerax II material.

Using Porcerax II in appropriate areas, eliminates gas buildup, reduces injection pressure, lowers cycle times, gloss levels and substantially reduces scrap and reject rates.

IMPORTANT WARNING:
It is imperative that anyone coming into contact with Porcerax II during the mold building or molding operations understand the characteristics and sensitivity of this material. Any questions should be directed to International Mold Steel at 1-800-625-6653.